xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
17
disable password encryption
Purpose
Used to disable password encryption.
Syntax disable password encryption
Description
The user account configuration information will be stored in the configuration file, and can be
applied to the system later.
If the password encryption is enabled, the password will be in encrypted form.
When password encryption is disabled, if the user specifies the password in plain text form,
the password will be in plan text form. However, if the user specifies the password in
encrypted form, or if the password has been converted to encrypted form by the last enable
password encryption command, the password will still be in the encrypted form. It cannot be
reverted to the plaintext.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To disable password encryption:
show session
Purpose
Used to display a list of currently logged-in users.
Syntax show session
Description
This command displays a list of all the users that are logged-in at the time the command is
issued.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To display the way that the users logged in:
Command: show session
ID Live Time From Level Name
--- --------- ------------ ----- -------
8 00:00:16.250 Serial Port admin Anonymous
Total Entries: 1
To Next Page
Loading...
Need help?
General