D-Link xStack DES-3528 Series - Page 186

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
186
To display the multicast groups configured for a multicast VLAN.
DES-3528:admin# show igmp_snooping multicast_vlan_group v1
Command: show igmp_snooping multicast_vlan_group v1
VLAN Name VLAN ID Multicast Group Profiles
------------------------------- ------- ---------------------------------
v1 3
DES-3528:admin#
delete igmp_snooping multicast_vlan
Purpose
Used to delete a muticast VLAN.
Syntax delete igmp_snooping multicast_vlan <vlan_name 32>
Description
This command allows you to delete multicat_vlan.
Parameters
vlan_name − The name of the multicast VLAN to be deleted.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To delete an IGMP snoop multicast VLAN:
DES-3528:admin# delete igmp_snooping multicast_vlan v1
Command: delete igmp_snooping multicast_vlan v1
Success.
DES-3528:admin#
enable igmp_snooping multicast_vlan
Purpose
Used to enable the multicast VLAN function.
Syntax enable igmp_snooping multicast_vlan
Description
This command controls the multicast VLAN function. The ISM VLAN will take effect when
IGMP snooping multicast VLAN is enabled.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To enable IGMP snoop multicast VLAN:
DES-3528:admin# enable igmp_snooping multicast_vlan
Command: enable igmp_snooping multicast_vlan
Success.
DES-3528:admin#