D-Link xStack DES-3528 Series - Page 187

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
187
disable igmp_snooping multicast_vlan
Purpose
Used to disable the multicast VLAN function.
Syntax disable igmp_snooping multicast_vlan
Description
This command is used to disable the IGMP snooping multicast VLAN function.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To enable IGMP snoop multicast VLAN:
DES-3528:admin# disable igmp_snooping multicast_vlan
Command: disable igmp_snooping multicast_vlan
Success.
DES-3528:admin#
show igmp_snooping multicast_vlan
Purpose
Used to show the information of multicast VLAN.
Syntax show igmp_snooping multicast_vlan {<vlan_name 32>}
Description
This command allows you to show the information of multicast VLAN.
Parameters
<vlan_name> − The name of the multicast VLAN to be shown.
Restrictions
None.
Example usage:
To display IGMP snoop multicast VLAN:
DES-3528:admin#show igmp_snooping multicast_vlan
Command: show igmp_snooping multicast_vlan
IGMP Multicast VLAN Global State : Enabled
IGMP Multicast VLAN Forward Unmatched : Disabled
VLAN Name :newmulti
VID :10
Member(Untagged) Ports :5-10
Tagged Member Ports :
Source Ports :
Untagged Source Ports :
Status :Enabled
Replace Source IP : 0.0.0.0
Remap Priority :None
Total Entries: 1
DES-3528:admin#