xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
195
show mld_snooping multicast_vlan_group
Purpose
Used to display the multicast group profiles configured for the specified MLD multicast VLAN.
Syntax show mld_snooping multicast_vlan_group {< vlan_name 32> }
Description
This command is used to display the multicast group profiles configured for the specified
MLD multicast VLAN.
Parameters vlan_name – The name of the multicast VLAN to be configured, each multicast VLAN is
given a name that can be up to 32 characters. If not specified, all IPv6 multicast VLAN
groups will be displayed.
Restrictions
None.
Example usage:
To display the multicast group profiles configured for an MLD multicast VLAN.
DES-3528:admin# show mld_snooping multicast_vlan_group
Command: show mld_snooping multicast_vlan_group
VLAN Name VLAN ID Multicast Group Profiles
------------------------------- ------- --------------------------
mv1 2 g1
delete mld_snooping multicast_vlan
Purpose
Used to delete an MLD muticast VLAN.
Syntax delete mld_snooping multicat_vlan <vlan_name 32>
Description
This command allows you to delete an MLD multicast VLAN.
Parameters vlan_name – The name of the multicast VLAN to be deleted.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To delete an MLD multicast VLAN:
DES-3528:admin# delete mld_snooping multicast_vlan mv1
Command: delete mld_snooping multicast_vlan mv1
Success.
enable mld_snooping multicast_vlan
Purpose
Used to enable the MLD Multicast VLAN function.
Syntax enable mld_snooping multicast_vlan
Description
This command is used for the MLD Multicast VLAN to take effect. The MSM VLAN will take
effect when MLD snooping multicast VLAN is enabled.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To enable MLD Multicast VLAN:
DES-3528:admin# enable mld_snooping multicast_vlan
Command: enable mld_snooping multicast_vlan