D-Link xStack DES-3528 Series - Page 196

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
196
Success.
DES-3528:admin#
disable mld_snooping multicast_vlan
Purpose
Used to disable the MLD Multicast VLAN function.
Syntax disable mld_snooping multicast_vlan
Description
This command is used to disable the MLD Multicast VLAN function.
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To enable MLD Multicast VLAN:
DES-3528:admin# disable mld_snooping multicast_vlan
Command: disable mld_snooping multicast_vlan
Success.
DES-3528:admin#
show mld_snooping multicast_vlan
Purpose
Used to show the information of MLD multicast VLAN.
Syntax show mld_snooping multicast_vlan {<vlan_name 32>}
Description
This command allows you to show the information of an MLD multicast VLAN.
Parameters
<vlan_name> − The name of the multicast VLAN to be shown. If not specified, all MLD
multicast VLANs will be displayed.
Restrictions
None.
Example usage:
To show MLD multicast VLAN: