Command: show mld_snooping multicast_vlan new
MLD Multicast VLAN Global State : Disabled
MLD Multicast VLAN Forward Unmatched : Enabled
VLAN Name :new
VID :2
Member(Untagged) Ports :
Tagged Member Ports :
Source Ports :
Untagged Source Ports :
Status :Disabled
Replace Source IP : ::
Remap Priority :None
Total Entries: 1
config mld_snooping multicast_vlan forward_unmatched
Purpose
Used to configure forwarding mode for MLD Multicast VLAN unmatched packet.
Syntax config mld_snooping multicast_vlan forward_unmatched [disable | enable]
Description
When the Switch receives an MLD packet, it will match the packet against the multicast
profile to determine the MLD multicast VLAN to be associated with. If the packet does not
match any profiles, the packet will be forwarded or dropped based on the setting.
By default, the packet will be dropped.
Parameters
enable − The unmatched packet will be flooded on the VLAN.
disable − The unmatched packet will be dropped.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To set unmatched packet to be flooded on the VLAN:
To Next Page
Loading...
Need help?
General