xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
200
config igmp_snooping
Purpose
The config igmp_snooping command configures IGMP snooping on the Switch.
Syntax config igmp_snooping [vlan_name <vlan_name 32> | vlanid <vlanid_list> | all] {state
[enable | disable] | fast_leave [enable | disable] | report_suppression [enable |
disable]}(1)
Description
The config igmp_snooping command configures IGMP snooping on the Switch.
Parameters vlan_name - Specify the name of the VLAN for which IGMP snooping is to be configured.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - Specify the VLAN ID for which IGMP snooping is to be configured.
<vlanid_list> - Enter the VLAN ID here.
all - Specify to use all configured VLANs.
state - (Optional) Enable or disable IGMP snooping for the chosen VLAN.
enable - Enter enable to enable IGMP snooping for the chosen VLAN.
disable - Enter disable to disable IGMP snooping for the chosen VLAN.
fast_leave - Enable or disable the IGMP snooping fast leave function.
enable - Enter enable to enable the IGMP snooping fast leave function. If enabled, the
membership is immediately removed when the system receives the IGMP leave message.
disable - Enter disable to disable the IGMP snooping fast leave function.
report_suppression - When IGMP report suppression is enabled (the default), the Switch
sends the first IGMP report from all hosts for a group to all the multicast routers. The Switch
does not send the remaining IGMP reports for the group to the multicast routers. If the
multicast router query includes requests only for IGMPv1 and IGMPv2 reports, the Switch
forwards only the first IGMPv1 or IGMPv2 report from all hosts for a group to all the multicast
routers. If the multicast router query also includes requests for IGMPv3 reports, the Switch
forwards all IGMPv3 reports for a group to the multicast devices.
enable - Enter enable to enable the report suppression function.
disable - Enter disable to disable the report suppression function.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To configure IGMP snooping:
To Next Page
Loading...
