D-Link xStack DES-3528 Series

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
206
DES-3528:admin# config igmp_snooping static_group vlan default 239.1.1.1 delete 2:9-
2:10
Command: create igmp_snooping static_group vlan default 239.1.1.1 delete 2:9-2:10
Success.
DES-3528:admin#
show igmp_snooping static_group
Purpose
This command is used to display the IGMP snooping multicast group static members.
Syntax show igmp_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>]
<ipaddr>}
Description
This command is used to display the IGMP snooping multicast group static members.
Parameters vlan - Specify the name of the VLAN on which the static group resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - Specify the ID of the VLAN on which the static group resides.
<vlanid_list> - Enter the VLAN ID here.
<ipaddr> - Specify the multicast group IP address.
Restrictions
None.
Example usage:
To display all the IGMP snooping static groups:
DES-3528:admin# show igmp_snooping static_group
VLAN ID/Name IP Address Static Member Ports
-------------- ------------------ ------------------------
1 / default 239.1.1.1 2:9-2:10
Total Entries : 1
DES-3528:admin#