D-Link xStack DES-3528 Series

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
226
clear mld_snooping data_driven_group
Purpose
Used to delete the MLD snooping groups learned by data driven.
Syntax clear mld_snooping data_driven_group [all | [vlan_name <vlan_name> | vlanid
<vlanid_list>] [<ipv6addr> | all]]
Description
Used to delete the MLD snooping groups learned by data driven.
Parameters all - Specify all VLANs to which IGMP snooping groups will be deleted.
vlan_name - Specify the VLAN name.
<vlan_name> - Enter the VLAN name here.
vlanid - Specify the VLAN ID.
<vlanid_list> - Enter the VLAN ID list here.
<ipaddr> - Specify the group’s IP address learned by data driven.
all - Specify to clear all data driven groups of the specified VLAN.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To delete all the groups learned by data-driven:
DES-3528:admin# clear mld_snooping data_driven_group all
Command: clear mld_snooping data_driven_group all
Success.
DES-3528:admin#
show mld_snooping statistic counter
Purpose
This command displays the statistics counter for IGMP protocol packets that are received by
the Switch since IGMP snooping was enabled.
Syntax show mld _snooping statistic counter [vlan <vlan_name> | vlanid <vlanid_list> | ports
<portlist>]
Description
This command displays the statistics counter for IGMP protocol packets that are received by
the Switch since IGMP snooping was enabled.
Parameters vlan - Specify a VLAN to be displayed.
<vlan_name> - Enter the VLAN name here.
vlanid - Specify a list of VLANs to be displayed.
<vlanid_list> - Enter the VLAN ID list here.
ports - Specify a list of ports to be displayed.
<portlist> - Enter the list of port here.
Restrictions
None.
Example usage:
To show MLD snooping statistics counters: