Command: show auth_diagnostics ports 1
Port number : 1
Original RX VID 3
MAC Address 00-05-5D-F9-16-76
EntersConnecting 1
EapLogoffsWhileConnecting 0
EntersAuthenticating 1
SuccessWhileAuthenticating 1
TimeoutsWhileAuthenticating 0
FailWhileAuthenticating 0
ReauthsWhileAuthenticating 0
EapStartsWhileAuthenticating 0
EapLogoffWhileAuthenticating 0
ReauthsWhileAuthenticated 0
EapStartsWhileAuthenticated 0
EapLogoffWhileAuthenticated 0
BackendResponses 2
BackendAccessChallenges 1
BackendOtherRequestsToSupplicant 0
BackendNonNakResponsesFromSupplicant 1
BackendAuthSuccesses 1
BackendAuthFails 0
show auth_session_statistics
Purpose
Used to display authenticator session statistics information
Syntax show auth_session_statistics {ports <portlist> | all}
Description
This command displays authenticator session statistics information
Parameters
portlist − Specifies a range of ports to be shown.
all − All port.
Restrictions
None.
Example usage:
To display authenticator session statistics information from port 1:
Command: show auth_session_statistics ports 1
Port number : 1
Original RX VID 3
MAC Address 00-05-5D-F9-16-76
SessionOctetsRx 1862
SessionOctetsTx 137
SessionFramesRx 26
SessionFramesTx 2
SessionId ether1_1-1
SessionAuthenticMethod Local Authentication Server
SessionTime 71
SessionTerminateCause NotTerminatedYet
SessionUserName aaa