D-Link xStack DES-3528 Series - Page 257

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
257
Total Entries : 1
DES-3528:admin#
show auth_statistics
Purpose
Used to display authenticator statistics information.
Syntax show auth_statistics {ports <portlist>}
Description
This command displays authenticator statistics information.
Parameters
portlist − Specifies a range of ports to be shown.
all − All ports.
Restrictions
None.
Example usage:
To display authenticator statistics information from port 1:
DES-3528:admin# show auth_statistics ports 1
Command: show auth_statistics ports 1
Port number : 1
Original RX VID 3
MAC Address 00-05-5D-F9-16-76
EapolFramesRx 2
EapolFramesTx 3
EapolStartFramesRx 0
EapolReqIdFramesTx 1
EapolLogoffFramesRx 0
EapolReqFramesTx 1
EapolRespIdFramesRx 1
EapolRespFramesRx 1
InvalidEapolFramesRx 0
EapLengthErrorFramesRx 0
LastEapolFrameVersion 1
LastEapolFrameSource 00-05-5D-F9-16-76
DES-3528:admin#
show auth_diagnostics
Purpose
Used to display authenticator diagnostics information
Syntax show auth_ diagnostics {ports <portlist> | all}
Description
This command displays authenticator diagnostics information
Parameters
portlist − Specifies a range of ports to be shown.
all − All ports.
Restrictions
None.
Example usage:
To display authenticator diagnostics information from port 1: