D-Link xStack DES-3528 Series - Page 308

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
308
Success.
DES-3528:admin#
delete sflow analyzer_server
Purpose
Used to delete the analyzer_server.
Syntax delete sflow analyzer_server < value 1-4 >
Description
This command deletes the analyzer_server.
Parameters value – analyzer_server ID.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To delete the sflow analyzer_server:
DES-3528:admin# delete sflow analyzer_server 2
Command: delete sflow analyzer_server 2
Success.
DES-3528:admin#
show sflow analyzer_server
Purpose
Used to show the sflow analyzer_server information.
Syntax show sflow analyzer_server
Description
This command is used to show the sflow analyzer_server information. The Timeout field
specifies the time configured by user. The Current countdown times is the current time
remaining before the server timesout.
Parameters
None.
Restrictions
None.
Example usage:
To show the sflow analyzer_server:
DES-3528:admin# show sflow analyzer_server
Command: show sflow analyzer_server
sFlow Analyzer_server Information
------------------------------
Server ID : 1
Owner : monitor
Timeout : 400
Current Countdown Time: 400
Collector Address : 10.90.90.1
Collector Port : 6343
Max Datagram Size : 1400
Total Entries: 1
DES-3528:admin#