D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
310
config sntp ipv6server
Purpose
This command is used to configure the SNTP IPv6 server information.
Syntax config sntp ipv6server {primary <ipv6addr> | secondary <ipv6addr>}
Description
If both SNTP IPv4 and IPv6 servers are configured, the SNTP IPv4 server has higher priority,
the Switch’s time syncs with the IPv4 server’s time first.
Parameters primary - (Optional) SNTP primary server IPv6 address.
<ipv6addr> - Enter the IP address used for this configuration here.
secondary - (Optional) SNTP secondary server IPv6 address.
<ipv6addr> - Enter the IP address used for this configuration here
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example usage:
To configure SNTP:
DES-3528:admin#config sntp ipv6server primary 1000::1 secondary 1000::2
Command: config sntp ipv6server primary 1000::1 secondary 1000::2
Success.
DES-3528:admin#
show sntp
Purpose
Used to display the SNTP information.
Syntax show sntp
Description
This command will display SNTP settings information including the source IP address, time
and poll interval.
Parameters
None.
Restrictions
None.
Example usage:
To display SNTP configuration information:
DES-3528:admin# show sntp
Command: show sntp
Current Time Source : System Clock
SNTP : Disabled
SNTP Primary Server : 10.1.1.1
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval : 30 sec
DES-3528:admin#

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English