xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
311
enable sntp
Purpose
Used to enable SNTP server support.
Syntax enable sntp
Description
This command enables SNTP support. SNTP service must be separately configured (see
config sntp). Enabling and configuring SNTP support will override any manually configured
system time settings.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command. SNTP settings must
be configured for SNTP to function (config sntp).
Example usage:
To enable the SNTP function:
disable sntp
Purpose
Used to disable SNTP server support.
Syntax disable sntp
Description
This command disables SNTP support. SNTP service must be separately configured (see
config sntp).
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To disable SNTP support:
config time
Purpose
Used to manually configure system time and date settings.
Syntax config time <date ddmmmyyyy> <time hh:mm:ss>
Description
This command configures the system time and date settings. These will be overridden if
SNTP is configured and enabled.
Parameters date – Express the date using two numerical characters for the day of the month, three
alphabetical characters for the name of the month, and four numerical characters for the
year. For example: 03aug2003.
time – Express the system time using the format hh:mm:ss, that is, two numerical characters
each for the hour using a 24-hour clock, the minute and second. For example: 19:42:30.
Restrictions
Only Administrator and Operator-level users can issue this command. Manually configured
system time and date settings are overridden if SNTP support is enabled.
Example usage:
To Next Page
Loading...
Need help?
General