D-Link xStack DES-3528 Series

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
312
To manually set system time and date settings:
DES-3528:admin# config time 30jul2013 16:30:30
Command: config time 30jul2013 16:30:30
Success.
DES-3528:admin#
config time_zone
Purpose
Used to determine the time zone used in order to adjust the system clock.
Syntax config time_zone {operator [+ | -] | hour <gmt_hour 0-13> | min <minute 0-59>}
Description
This command adjusts system clock settings according to the time zone. Time zone settings
will adjust SNTP information accordingly.
Parameters operator – Choose to add (+) or subtract (-) time to adjust for time zone relative to GMT.
hour – Select the number of hours different from GMT.
min – Select the number of minutes difference added or subtracted to adjust the time zone.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To configure time zone settings:
DES-3528:admin# config time_zone operator + hour 2 min 30
Command: config time_zone operator + hour 2 min 30
Success.
DES-3528:admin#