D-Link xStack DES-3528 Series - Page 317

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
317
DES-3528:admin# config arp_aging time 30
Command: config arp_aging time 30
Success.
DES-3528:admin#
show arpentry
Purpose
Used to display the ARP table.
Syntax show arpentry {ipif <ipif_name 12> | ipaddress <ipaddr> | static | mac_address
<macaddr>}
Description
This command is used to display the current contents of the Switch’s ARP table.
Parameters
ipif <ipif_name 12> − The name of the IP interface the end node or station for which the ARP
table entry was made, resides on.
ipaddress <ipaddr> − The network address corresponding to the IP interface name above.
static – Displays the static entries to the ARP table.
mac_address – Specifies the MAC address used for this configuration.
Restrictions
None.
Example Usage:
To display the ARP table:
DES-3528:admin# show arpentry
Command: show arpentry
ARP Aging Time : 20
Interface IP Address MAC Address Type
------------- --------------- ----------------- ---------------
System 10.0.0.0 FF-FF-FF-FF-FF-FF Local/Broadcast
System 10.1.1.164 00-50-BA-70-E4-65 Dynamic
System 10.1.1.254 00-03-09-18-10-01 Dynamic
System 10.1.104.222 00-04-00-00-00-00 Dynamic
System 10.2.87.62 00-50-BA-66-77-56 Dynamic
System 10.5.2.5 00-E0-18-D4-63-1C Dynamic
System 10.6.51.98 00-1D-60-E7-B5-CD Dynamic
System 10.9.68.89 00-13-65-61-A0-00 Dynamic
System 10.10.2.190 00-0F-3D-84-A0-0C Dynamic
System 10.10.27.66 00-80-C8-58-72-1B Dynamic
System 10.10.73.21 00-1E-58-4F-FE-60 Local
System 10.16.88.75 00-1C-F0-79-CA-13 Dynamic
System 10.20.20.8 00-17-31-ED-E4-5D Dynamic
System 10.20.20.61 00-00-81-9A-F2-F4 Dynamic
System 10.38.65.65 00-50-BA-DA-01-58 Dynamic
System 10.41.44.251 08-00-28-32-00-AC Dynamic
System 10.43.47.55 00-07-E9-13-9B-DC Dynamic
Total Entries: 17
DES-3528:admin#