D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
331
config authen_login
Purpose
Used to configure a user-defined or default method list of authentication methods for user
login.
Syntax config authen_login [default | method_list_name <string 15>] method {tacacs | xtacacs
| tacacs+ | radius | server_group <string 15> | local | none}(1)
Description
This command will configure a user-defined or default method list of authentication methods
for users logging on to the Switch. The sequence of methods implemented in this command
will affect the authentication result. For example, if a user enters a sequence of methods like
tacacs – xtacacs – local, the Switch will send an authentication request to the first tacacs
host in the server group. If no response comes from the server host, the Switch will send an
authentication request to the second tacacs host in the server group and so on, until the list
is exhausted. At that point, the Switch will restart the same sequence with the following
protocol listed, xtacacs. If no authentication takes place using the xtacacs list, the local
account database set in the Switch is used to authenticate the user. When the local method
is used, the privilege level will be dependant on the local account privilege configured on the
Switch.
Successful login using any of these methods will give the user a “user” privilege only. If the
user wishes to upgrade his or her status to the administrator level, the user must implement
the enable admin command, followed by a previously configured password. (See the enable
admin part of this section for more detailed information, concerning the enable admin
command.)
Parameters default – The default method list for access authentication, as defined by the user. The user
may choose one or a combination of up to four of the following authentication methods:
 tacacs – Adding this parameter will require the user to be authenticated using the
TACACS protocol from the remote TACACS server hosts of the TACACS server
group list.
 xtacacs – Adding this parameter will require the user to be authenticated using the
XTACACS protocol from the remote XTACACS server hosts of the XTACACS
server group list.
 tacacs+ – Adding this parameter will require the user to be authenticated using the
TACACS+ protocol from the remote TACACS+ server hosts of the TACACS+ server
group list.
 radius − Adding this parameter will require the user to be authenticated using the
RADIUS protocol from the remote RADIUS server hosts of the RADIUS server
group list.
 server_group <string 15> − Adding this parameter will require the user to be
authenticated using a user-defined server group previously configured on the
Switch.
 local − Adding this parameter will require the user to be authenticated using the
local user account database on the Switch.
 none – Adding this parameter will require no authentication to access the Switch.
method_list_name – Enter a previously implemented method list name defined by the user.
The user may add one, or a combination of up to four of the following authentication methods
to this method list:
 tacacs – Adding this parameter will require the user to be authenticated using the
TACACS protocol from a remote TACACS server.
 xtacacs – Adding this parameter will require the user to be authenticated using the
XTACACS protocol from a remote XTACACS server.
 tacacs+ – Adding this parameter will require the user to be authenticated using the
TACACS+ protocol from a remote TACACS+ server.
 radius − Adding this parameter will require the user to be authenticated using the
RADIUS protocol from a remote RADIUS server.
 server_group <string 15> − Adding this parameter will require the user to be
authenticated using a user-defined server group previously configured on the
Switch.
 local − Adding this parameter will require the user to be authenticated using the
local user account database on the Switch.

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English