xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
332
config authen_login
none – Adding this parameter will require no authentication to access the Switch.
NOTE: Entering none or local as an authentication protocol will override any other
authentication that follows it on a method list or on the default method list.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure the user defined method list “Trinity” with authentication methods TACACS, XTACACS and local.
DES-3528:admin# config authen_login method_list_name Trinity method tacacs xtacacs
local
Command: config authen_login method_list_name Trinity method tacacs xtacacs local
Success.
Example usage:
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that
order:
DES-3528:admin# config authen_login default method xtacacs tacacs+ local
Command: config authen_login default method xtacacs tacacs+ local
Success.
delete authen_login method_list_name
Purpose
Used to delete a user-defined method list of authentication methods for user login.
Syntax delete authen_login method_list_name <string 15>
Description
This command is used to delete a list for authentication methods for user login.
Parameters
<string 15> − Enter an alphanumeric string of up to 15 characters to define the given method
list the user wishes to delete.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To delete the method list name “Trinity”:
DES-3528:admin# delete authen_login method_list_name Trinity
Command: delete authen_login method_list_name Trinity
Success.
To Next Page
Loading...
Need help?
General