xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
333
show authen_login
Purpose
Used to show a user-defined or default or all method lists of authentication methods for user
login.
Syntax show authen_login [default | method_list_name <string 15> | all]
Description
This command is used to show a list of authentication methods for user login.
Parameters default – Entering this parameter will display the default method list for users logging on to
the Switch.
method_list_name <string 15> − Enter an alphanumeric string of up to 15 characters to
define the given method list to view.
all – Entering this parameter will display all the authentication login methods currently
configured on the Switch.
The window will display the following parameters:
Method List Name – The name of a previously configured method list name.
Priority – Defines which order the method list protocols will be queried for
authentication when a user attempts to log on to the Switch. Priority ranges from
1(highest) to 4 (lowest).
Method Name – Defines which security protocols are implemented, per method list
name.
Comment – Defines the type of Method. User-defined Group refers to server group
defined by the user. Built-in Group refers to the TACACS, XTACACS, TACACS+
and RADIUS security protocols which are permanently set in the Switch. Keyword
refers to authentication using a technique INSTEAD of TACACS / XTACACS /
TACACS+ / RADIUS which are local (authentication through the user account on
the Switch) and none (no authentication necessary to access any function on the
Switch).
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To view the authentication login method list named Trinity:
Command: show authen_login method_list_name Trinity
Method List Name Priority Method Name Comment
---------------- -------- -------------- ---------
Trinity 1 tacacs+ Built-in Group
2 tacacs Built-in Group
3 Darren User-defined Group
4 local Keyword
To Next Page
Loading...
