xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
334
create authen_enable method_list_name
Purpose
Used to create a user-defined method list of authentication methods for promoting user's
privilege to Admin level.
Syntax create authen_enable method_list_name <string 15>
Description
This command is used to promote users with normal level privileges to Administrator level
privileges using authentication methods on the Switch. Once a user acquires normal user
level privileges on the Switch, he or she must be authenticated by a method on the Switch to
gain administrator privileges on the Switch, which is defined by the Administrator. A
maximum of eight enable method lists can be implemented on the Switch.
Parameters
<string 15> − Enter an alphanumeric string of up to 15 characters to define the given enable
method list to create.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To create a user-defined method list, named “Permit” for promoting user privileges to Administrator privileges:
To Next Page
Loading...
