D-Link xStack DES-3528 Series - Page 372

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
372
Success.
DES-3528:admin#
disable jwac forcible_logout
Purpose
Used to disable JWAC forcible logout function.
Syntax disable jwac forcible_logout
Description
This command is used to disable JWAC forcible logout function.
Parameters
None.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To disable JWAC forcible_logout:
DES-3528:admin# disable jwac forcible_logout
Command: disable jwac forcible_logout
Success.
DES-3528:admin#
enable jwac udp filtering
Purpose
Used to enable JWAC UDP filtering function.
Syntax enable jwac udp_filtering
Description
This command is used to drop all UDP and ICMP packets, except DHCP and DNS packets,
from unauthenticated hosts.
Parameters
None.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To enable JWAC udp_filtering:
DES-3528:admin# enable jwac udp_filtering
Command: enable jwac udp_filtering
Success.
DES-3528:admin#
disable jwac udp_filtering
Purpose
Used to disable JWAC UDP filtering function.
Syntax disable jwac udp_filtering
Description
This command is used to disable JWAC UDP filtering function.
Parameters
None.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To disable JWAC udp_filtering:
DES-3528:admin# disable jwac udp_filtering
Command: disable jwac udp_filtering
Success.