D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
384
config jwac authorization attributes
Purpose
Used to enable or disable the accepting of authorized configuration.
Syntax config jwac authorization attributes {radius [enable | disable] | local[enable |
disable]}(1)
Description
This command allows the administrator to configure authorization network for JWAC. When
the authorization is enabled for JWAC’s radius, the authorized data assigned by the RADUIS
server will be accepted if the global authorization network is enabled.
When the authorization is enabled for JWAC’s local, the authorized data assigned by the
local database will be accepted.
Parameters radius –If specified to enable, the authorized data assigned by the RADUIS server will be
accepted if the global authorization attributes is enabled.The default state is enabled.
local –If specified to enable, the authorized data assigned by the local database will be
accepted if the global authorization attributes is enabled.The default state is enabled.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To enable the accepting of authorized configuration:
DES-3528:admin#config jwac authorization attributes radius enable
Command: config jwac authorization attributes radius enable
Success.
DES-3528:admin#
config jwac authenticate_page
Purpose
Used to choose authenticate page.
Syntax config jwac authenticate_page [japanese | english]
Description
This command allows administrator to decide which authenticate page to be used.
Parameters jappanese – Choose the Japanese page
english – Choose the English page,the default page is english.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To choose Japanese authenticate page.
DES-3528:admin# config jwac authenticate_page japanese
Command: config jwac authenticate_page japanese
Success.
DES-3528:admin#
show jwac authenticate _page
Purpose
Used to show the element mapping of the customize authenticate page.
Syntax show jwac authenticate _page
Description
This command can disaplay the element of the customize authenticate page.
Parameters
None
Restrictions
None
Example usage:
To disaplay element of authenticate page.
DES-3528:admin# show jwac authenticate_page

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English