D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
387
Command Parameters
show lldp_med local_ports {<portlist>}
show lldp_med ports {<portlist>}
show lldp_med remote_ports {<portlist>}
Each command is listed, in detail, in the following sections.
enable lldp
Purpose
Used to enable LLDP operation on the Switch.
Syntax enable lldp
Description
This is a global control for the LLDP function. When this function is enabled, the Switch can
start to transmit LLDP packets and receive and process the LLDP packets. The specific
function of each port will depend on the per port LLDP setting. For the advertisement of
LLDP packets, the Switch announces the information to its neighbor through ports. For the
receiving of LLDP packets, the Switch will learn the information from the LLDP packets
advertised from the neighbor in the neighbor table. The default state for LLDP is disabled.
Parameters
None.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To enable LLDP:
DES-3528:admin# enable lldp
Command: enable lldp
Success.
DES-3528:admin#
disable lldp
Purpose
Used to disable LLDP operation on the Switch.
Syntax disable lldp
Description
This command will stop the sending and receiving of LLDP advertisement packets on the
Switch.
Parameters
None.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To disable LLDP:
DES-3528:admin# disable lldp
Command: disable lldp
Success.
DES-3528:admin#

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English