D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
393
DES-3528:admin#
config lldp port
Purpose
Used to configure an individual port or group of ports to exclude one or more of IEEE 802.1
Organizationally port and protocol VLAN ID TLV data types from outbound LLDP
advertisements.
Syntax config lldp ports [<portlist> | all] dot1_tlv_protocol_vid [vlan [all | <vlan_name 32> ] |
vlanid <vidlist> ] [enable | disable]
Description
This TLV optional data type indicates whether the corresponding Local System’s port and
protocol VLAN ID instance will be transmitted on the port. If a port is associated with multiple
protocol VLANs, those enabled port and protocol VLAN IDs will be advertised.
Parameters <portlist> – Use this parameter to define ports to be configured.
all – Use this parameter to set all ports in the system.
dot1_tlv_protocol_vid – This TLV optional data type determines whether the IEEE 802.1
organizationally defined port and protocol VLAN ID TLV transmission is allowed on a given
LLDP transmission capable port. The default state is disabled.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To configure exclude the port and protocol VLAN ID TLV from the outbound LLDP advertisements for all
ports:
DES-3528:admin# config lldp ports all dot1_tlv_protocol_vid vlanid 1-3 enable
Command: config lldp ports all dot1_tlv_protocol_vid vlanid 1-3 enable
Success.
DES-3528:admin#
config lldp port
Purpose
Used to configure an individual port or group of ports to exclude one or more of IEEE 802.1
Organizationally VLAN name TLV data types from outbound LLDP advertisements.
Syntax config lldp ports [<portlist> | all] dot1_tlv_vlan_name [vlan [all | <vlan_name 32> ] |
vlanid <vidlist> ] [enable | disable ]
Description
This TLV optional data type indicates whether the corresponding Local System’s VLAN name
instance will be transmitted on the port. If a port is associated with multiple VLANs, those
enabled VLAN IDs will be advertised.
Parameters <portlist> – Use this parameter to define ports to be configured.
all – Use this parameter to set all ports in the system.
dot1_tlv_vlan_name – This TLV optional data type indicates whether the corresponding
Local System’s VLAN name instance will be transmitted on the port. If a port is associated
with multiple VLANs, those enabled VLAN IDs will be advertised. The default state is
disabled.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Usage Example:
To configure exclude the VLAN name TLV from the outbound LLDP advertisements for all ports:
DES-3528:admin# config lldp ports all dot1_tlv_vlan_name vlanid 1-3 enable
Command: config lldp ports all dot1_tlv_vlan_name vlanid 1-3 enable
Success.
DES-3528:admin#

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English