D-Link xStack DES-3528 Series

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
397
show lldp ports
Purpose
Used to display the LLDP per port configuration for advertisement options.
Syntax show lldp ports {<portlist>}
Description
This command displays the LLDP per port configuration for advertisement options.
Parameters <portlist> – Use this parameter to define ports to be configured.
Restrictions
None.
Example usage:
To display the LLDP per port TLV option configuration:
DES-3528:admin# show lldp ports 1
Command: show lldp ports 1
Port ID : 1
-----------------------------------------------------------------
Admin Status : TX_and_RX
Notification Status : Disabled
Advertised TLVs Option :
Port Description Disabled
System Name Disabled
System Description Disabled
System Capabilities Disabled
Enabled Management Address
(None)
Port VLAN ID Disabled
Enabled Port_and_Protocol_VLAN_ID
(None)
Enabled VLAN Name
(None)
Enabled Protocol_Identity
(None)
MAC/PHY Configuration/Status Disabled
Link Aggregation Disabled
Maximum Frame Size Disabled
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show lldp local_ports
Purpose
Used to display the per-port information currently available for populating outbound LLDP
advertisements.
Syntax show lldp local_ports {<portlist>} {mode [brief | normal | detailed]}
Description
This command displays the per-port information currently available for populating outbound
LLDP advertisements.
Parameters <portlist> – Use this parameter to define ports to be configured.
brief – Display the information in brief mode.
normal – Display the information in normal mode. This is the default display mode.
detailed – Display the information in detailed mode.
Restrictions
None.
Usage Example:
To display outbound LLDP advertisements for port 1-2:
DES-3528:admin# show lldp local_ports 1-2
Command: show lldp local_ports 1-2
Port ID : 1
-----------------------------------------------------------------------------
Port ID Subtype : Local