D-Link xStack DES-3528 Series

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
408
Port ID: 1
---------------------------------------------------------
Role: NNI
Miss Drop: Disabled
Outer Tpid: 0x8100
Use Inner Priority: Disabled
Add Inner Tag: Disabled
Port ID: 2
---------------------------------------------------------
Role: NNI
Miss Drop: Disabled
Outer Tpid: 0x8100
Use Inner Priority: Disabled
Add Inner Tag: Disabled
DES-3528:admin#
config qinq inner_tpid
Purpose
Used to configure the system’s inner TPID.
Syntax config qinq inner_tpid <hex 0x1 - 0xffff>
Description
The command is used to configure the inner TPID of the system. The inner TPID is used to
decide whether the ingress packet is c-tagged. Inner tag TPID is per system configurable.
This command is for projects that support per system TPID configuration.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage
To configure the inner TPID in the system to 0x9100:
DES-3528:admin# config inner_TPID 0x9100
Success.
DES-3528:admin#