D-Link xStack DES-3528 Series - Page 410

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
410
show vlan_translation
Purpose
Used to show pre-created C-VLAN based SP-VLAN assignment rules.
Syntax show vlan_translation {[ports <portlist> | cvid <vidlist>]}
Description
The command is used to show pre-created C-VLAN based SP-VLAN assignment rules.
Parameters
ports − A range of ports which the rules will be displayed. If no parameters are specified, all
rules will be displayed.
cvid - Specifies C-VLAN range which the rules will be displayed.
Restrictions
None.
Example usage
To show vlan_translation rules in the system:
DES-3528:admin# show vlan_translation
Commands: show vlan_translation
Port CVID SPVID Action Priority
------ ----- ----- ------ ------
1 10 100 Add 4
1 20 100 Add 5
1 30 200 Add 6
2 10 100 Add 7
2 20 100 Add 1
Total Entries: 5
DES-3528:admin#