D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
419
DES-3528:admin#
show sred
Purpose
Used to display the simple RED configure parameter.
Syntax show sred { <portlist>{ <class_id 0-7>}}
Description
This command displays the current threshold(per port and per queue) parameters in use on
the Switch
Parameters
portlist − A range of ports to show.
class_id − This specifies which of the eight hardware CoS queues the config sred command
will apply to.
Restrictions
None.
Example usage
To show sred:
DES-3528:admin# show sred
Command: show sred
Simple RED Globale Status: Disabled
Port Class Drop Green Threshold Drop Rate
Low High Low High
---- ----- --------- ---- ---- ---- ----
1 0 Disabled 60 80 1 1
1 1 Disabled 60 80 1 1
1 2 Disabled 60 80 1 1
1 3 Disabled 60 80 1 1
1 4 Disabled 60 80 1 1
1 5 Disabled 60 80 1 1
1 6 Disabled 60 80 1 1
1 7 Disabled 60 80 1 1
2 0 Disabled 60 80 1 1
2 1 Disabled 60 80 1 1
2 2 Disabled 60 80 1 1
2 3 Disabled 60 80 1 1
2 4 Disabled 60 80 1 1
2 5 Disabled 60 80 1 1
2 6 Disabled 60 80 1 1
2 7 Disabled 60 80 1 1
3 0 Disabled 60 80 1 1
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show sred drop_counter
Purpose
Used to display the simple RED drop packet counter per port.
Syntax show sred drop_counter {<portlist>}
Description
This command displays, for the egress port, the count of dropped packets
Parameters
portlist − A range of ports to show.
Restrictions
None.
Example usage
This example displays red and yellow packet drop counts for all ports:
DES-3528:admin# show sred drop_counter
Command: show sred drop_counter
Port Yellow Red
---- --------- --------

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English