D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
436
disable wac
Purpose
Used to disable the WAC function.
Syntax disable wac
Description
This command will disable the WAC function.
Parameters
None.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To disable the WAC function:
DES-3528:admin# disable wac
Command: disable wac
Success.
DES-3528:admin#
config wac authorization attributes
Purpose
Used to enable the acceptance of an authorized configuration.
Syntax config wac authorization attributes {radius [enable | disable] | local [enable |
disable]}(1)
Description
This command is used to configure the acceptance of an authorized configuration.
When the authorization is enabled for WAC’s radius, the authorized data assigned by the
RADUIS server will be accepted if the global authorization network is also enabled.
When the authorization is enabled for WAC’s local, the authorized data assigned by the local
database will be accepted.
Parameters radius – If enabled, the authorized data assigned by the RADUIS server will be accepted if
the global authorization network is enabled. The default state is enabled.
local – If specified to enable, the authorized data assigned by the local database will be
accepted if the global authorization network is enabled. The default state is enabled.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To disable WAC local authorization:
DES-3528:admin# config wac authorization network local disable
Command: config wac authorization network local disable
Success.
DES-3528:admin#
config wac clear_default_redirpath
Purpose
Used to clear the WAC default redirect path.
Syntax config wac clear_default_redirpath
Description
This command is used to clear a WAC default redirect path. When the string is cleared, the
client will be redirected to logout page after successful authentication.
Parameters
None.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To clear a WAC default redirect path:
DES-3528:admin# config wac clear_default_redirpath
Command: config wac clear_default_redirpath

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English