xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
437
config wac default_redirpath
Purpose
Used to config wac default redirect path.
Syntax config wac default_redirpath <string 128>
Description
If the default redirect path is configured, the user will be redirected to the default redirect path
after successful authentication.
When the string is cleared, the client will be redirected to logout page after successful
authentication.
Parameters <string 128> – The URL that the client will be redirected to after successful authentication.
The redirected path is cleared by default.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To configure the WAC default redirect path:
DES-3528:admin# config wac default_redirpath http://2.3.2.3
Command: config wac default_redirpath http://2.3.2.3
Success.
config wac method
Purpose
To configure the WAC method.
Syntax config wac method [local | radius]
Description
This command configures the WAC method.
Parameters method – Specifies the authentication method.
local – The authentication will be done via the local database.
radius – The authentication will be done via the RADIUS server.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To configure the WAC authentication method:
DES-3528:admin# config wac method radius
Command: config wac method radius
Success.
To Next Page
Loading...
Need help?
General