D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
47
DES-3528:admin# create snmp user dlink default encrypted by_password auth md5 canadian
priv none
Command: create snmp user dlink default encrypted by_password auth md5 canadian priv
none
Success.
DES-3528:admin#
delete snmp user
Purpose
Used to remove an SNMP user from an SNMP group.
Syntax delete snmp user <user_name 32>
Description
This command removes an SNMP user from its SNMP group.
Parameters
<user_name 32> − An alphanumeric string of up to 32 characters that identifies the SNMP
user that will be deleted.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To delete a previously entered SNMP user on the Switch:
DES-3528:admin# delete snmp user dlink
Command: delete snmp user dlink
Success.
DES-3528:admin#
show snmp user
Purpose
Used to display information about each SNMP username in the SNMP group username
table.
Syntax show snmp user
Description
This command displays information about each SNMP username in the SNMP group
username table.
Parameters
None.
Restrictions
None.
Example usage:
To display the SNMP users currently configured on the Switch:
DES-3528:admin# show snmp user
Command: show snmp user
Username Group Name VerAuthPriv
-------- ------------- -----------
initial initial V3 NoneNone
Total Entries: 1
DES-3528:admin#

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English