xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
480
delete dhcp pool manual_binding
Purpose Used to specify the distinct identification of the client in dotted-hexadecimal notation or
hardware address to delete.
Syntax delete dhcp pool manual_binding <pool_name 12> [<ipaddr> | all]
Description
An address binding is a mapping between the IP address and MAC address of a client. The
delete dhcp pool manual_binding command can be used to delete the manual binding
entries.
Parameters <pool name 12> – Specifies the name of the pool.
<ipaddr> – Specifies the IP address which will be deleted.
all – Specifies that all IP addresses will be deleted.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To delete manual binding entries:
DES-3528:admin# delete dhcp pool manual_binding accounting 10.10.10.1
Command: delete dhcp pool manual_binding accounting 10.10.10.1
Success.
clear dhcp binding
Purpose
Used to clear all the dynamic binding entries for a pool or all pools.
Syntax clear dhcp binding [<pool_name 12>[<ipaddr> | all] | all]
Description
This command clears a specific pool’s binding entries, or all binding entries in all pools.
NOTE: This command will not clear the dynamic binding entry which
matches a manual binding entry.
Parameters <pool name 12> – Specifies the name of the pool.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To clear a dynamic binding entry in pool “accounting”:
DES-3528:admin# clear dhcp binding all
Command: clear dhcp binding all
Success.
show dhcp binding
Purpose
Used to display the current binding entry information.
Syntax show dhcp binding { <pool_name 12>}
Description
This command displays the current binding entry information.
Parameters <pool name 12> – Specifies the name of the pool.
Restrictions
None.
Example usage:
To display dynamic binding entries:
To Next Page
Loading...
