D-Link xStack DES-3528 Series - Page 481

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
481
DES-3528:admin# show dhcp binding accounting
Command: show dhcp binding accounting
Pool Name IP Address Hardware Address Type Status Lifetime
----------- -------------- ---------------- ------- -------- -----------
accounting 192.168.0.1 00-08-C8-08-13-88 Ethernet Manual 86400
Total Entries: 1
DES-3528:admin#
show dhcp pool manual_binding
Purpose
Used to display the configured manual binding entries.
Syntax show dhcp pool manual binding {<pool_name 12>}
Description
This command displays the configured manual binding entries.
Parameters <pool name 12> – Specifies the name of the pool.
Restrictions
None.
Example usage:
To display the configured manual binding entries:
DES-3528:admin# show dhcp pool manual_binding
Command: show dhcp pool manual_binding
Pool Name IP Address Hardware Address Type
--------- ------------ ----------------- ------
p1 192.168.0.1 00-08-C8-08-13-88 Ethernet
p1 192.168.0.2 00-80-C8-08-13-99 Etherent
Total Entries: 2
DES-3528:admin#
show dhcp pool
Purpose
Used to display the information for DHCP pool.
Syntax show dhcp pool { <pool_name 12>}
Description
If the name is not specified, information for all pools will be displayed.
Parameters <pool name 12> – Specifies the name of the pool.
Restrictions
None.
Example usage:
To display dhcp pool entries:
DES-3528:admin# show dhcp pool accounting
Command: show dhcp pool accounting
Pool Name :accounting
Network Address :10.10.10.0/24
Domain Name :10.10.10.0/24
DNS Server :10.10.10.1
NetBIOS Name Server :10.10.10.1
NetBIOS Node Type :Hybrid
Default Router :10.10.10.1
Pool Lease :Infinite
Boot File :boot.had
Next Server :192.168.0.1
Total Entries: 1