D-Link xStack DES-3528 Series - Page 482

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
482
DES-3528:admin#
enable dhcp_server
Purpose
Used to enable the DHCP server function.
Syntax enable dhcp_server
Description
If the DHCP relay is enabled, the DHCP server cannot be enabled. The opposite is also true.
Parameters
None.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To enable the dhcp_server:
DES-3528:admin# enable dhcp_server
Command: enable dhcp_server
Success.
DES-3528:admin#
disable dhcp_server
Purpose
Used to disable the DHCP server function.
Syntax disable dhcp_server
Description
This command disables the DHCP server function.
Parameters
None.
Restrictions
Only Administrator and Operator and Power-User-level users can issue this command.
Example usage:
To disable the dhcp_server:
DES-3528:admin# disable dhcp_server
Command: disable dhcp_server
Success.
DES-3528:admin#
show dhcp_server
Purpose
Used to display the status of the DHCP server.
Syntax show dhcp_server
Description
This command displays the status of the DHCP server.
Parameters
None.
Restrictions
None.
Example usage:
To display the dhcp_server:
DES-3528:admin# show dhcp_server
Command: show dhcp_server
DHCP Server Global State: Disable
Ping Packet Number : 2
Ping Timeout : 500 ms
DES-3528:admin#