D-Link xStack DES-3528 Series

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
498
DES-3528:admin# show cfm linktrace mepname op-mep4
Command: show cfm linktrace mepname op-mep4
Trans ID Source MEP Dstination
-------- ---------------- -----------------
DES-3528:admin# show cfm linktrace mepname op-mep4 trans_id 0
Command: show cfm linktrace mepname op-mep4 trans_id 0
Transaction ID: 0
From MEP op-mep4 to 00-25-3C-11-2B-F3
Start Time : 2012-06-05 09:16:26
Hop MEPID Ingress MAC Address Egress MAC Address Forwarded Relay Action
--- ----- -------------------- ------------------- --------- ------------
1 - 00-00-00-00-00-00 00-00-35-28-46-01 Yes FDB
2 3 00-25-3C-11-2B-E9 00-25-3C-11-2B-F3 No Hit
DES-3528:admin#
delete cfm linktrace
Purpose
Used to delete received linktrace responses.
Syntax delete cfm linktrace {[md <string 22> {ma <string 22> {mepid <int 1-8191>}} | mepname
<string 32>]}
Description
This command deletes the stored link trace response data that is initiated by the specified
MEP.
Parameters mepname – Specifies the MEP name.
mepid – Specifies the MEP MEPID.
md – Specifies the maintenance domain name.
ma – Specifies the maintenance association name.
Restrictions
None.
Example usage:
To delete a cfm linktrace:
DES-3528:admin# delete cfm linktrace mepname mep1
Command: delete cfm linktrace mepname mep1
Success.
DES-3528:admin#