D-Link xStack DES-3528 Series - Page 516

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
516
show authentication guest_vlan
Purpose
This command is used to show guest VLAN setting.
Syntax show authentication guest_vlan
Description
This command is used to show guest VLAN setting.
Parameters
None.
Restrictions
None.
Example usage:
This example displays the guest VLAN setting:
DES-3528:admin# show authentication guest_vlan
Command: show authentication guest_vlan
Guest VLAN VID : 1
Guest VLAN Member Ports : 4
Guest VLAN VID : 3
Guest VLAN Member Ports : 1,8
Total Entries: 2
DES-3528:admin#
show authentication ports
Purpose
This command is used to display authentication setting on port(s).
Syntax show authentication ports {<portlist>}
Description
This command is used to display authentication setting on port(s).
Parameters ports – (Optional) Display compound authentication on specified port(s).
<portlist> - Enter the list of ports to be shown here.
If not specify the port list, displays compound authentication setting of all ports.
Restrictions
None.
Example usage:
This example displays authentication setting for all ports:
DES-3528:admin# show authentication ports
Command: show authentication ports
Port Methods Auth Mode Authentication VLAN(s)
---- ------------ ----------- ---------------------
1 None Host-based 1,3,5,9,11,88,16
18,56
2 Any Port-based
3 802.1X_IMPB Host-based
4 None Host-based 2000,2005
5 MAC_IMPB Host-based
6 IMPB_JWAC Port-based
7 None Host-based
8 None Host-based 1-20
9 802.1X_IMPB Host-based
10 None Host-based
DES-3528:admin#