D-Link xStack DES-3528 Series - Page 539

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
539
DES-3528:admin# config erps raps_vlan 4094 rpl_owner enable
Command: config erps raps_vlan 4094 rpl_owner enable
Success.
DES-3528:admin#
config erps raps_vlan protected_vlan
Purpose
This command is used to configure the VLANs that are protected by the ERPS function.
Syntax config erps raps_vlan <vlanid> protected_vlan [add | delete] vlanid <vidlist>
Description
The R-APS VLAN cannot be the protected VLAN. The protected VLAN can be one that has
already been created.
Parameters raps_vlan - Specifies the R-APS VLAN used.
<vlanid> - Enter the VLAN ID used here.
protected_vlan - Specifies to add or delete the protected VLAN group.
add - Add VLANs to the protected VLAN group.
delete - Delete VLANs from the protected VLAN group.
vlanid - Specifies the VLAN ID to be removed or added.
<vidlist> - Enter the VLAN ID list here.
Restrictions
Only Administrator, Operator and Power User-level users can issue this command.
Example usage:
To configure the protected VLAN for a specific R-APS VLAN:
DES-3528:admin# config erps raps_vlan 4094 protected_vlan add vlanid 10-20
Command: config erps raps_vlan 4094 protected_vlan add vlanid 10-20
Success.
DES-3528:admin#