xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
552
DES-3528:admin# config l2protocol_tunnel ports 1-4 type uni tunneled_protocol stp
Command: config l2protocol_tunnel ports 1-4 type uni tunneled_protocol stp
Success.
show l2protocol_tunnel
Purpose
This command is used to show Layer 2 protocol tunneling information.
Syntax show l2protocol_tunnel {[uni | nni]}
Description
This command is used to show Layer 2 protocol tunneling information.
Parameters uni - (Optional) Specify show UNI detail information.
nni - (Optional) Specify show NNI detail information.
Restrictions
None.
Example usage:
To show Layer 2 protocol tunneling information summary:
DES-3528:admin# show l2protocol_tunnel
Command: show l2protocol_tunnel
Global State: Enabled
UNI Ports: 1-2
NNI Ports: 3-4
To show Layer 2 protocol tunneling detail information on UNI ports:
DES-3528:admin# show l2protocol_tunnel uni
Command: show l2protocol_tunnel uni
UNI Tunneled Threshold
Port Protocol (packet/sec)
--- ------------------- ------------
1 STP 10
GVRP 0
01-00-0C-CC-CC-CC 0
01-00-0C-CC-CC-CD 0
2 STP 20
GVRP 0
To show Layer 2 protocol tunneling detail information on NNI ports:
DES-3528:admin# show l2protocol_tunnel nni
Command: show l2protocol_tunnel nni
NNI Protocol
Port
---- ------------------
1 STP
GVRP
01-00-0C-CC-CC-CC
01-00-0C-CC-CC-CD
2 STP
GVRP
01-00-0C-CC-CC-CC
01-00-0C-CC-CC-CD