D-Link xStack DES-3528 Series - Page 553

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
553
enable l2protocol_tunnel
Purpose
Used to enable the Layer 2 protocol tunneling function.
Syntax enable l2protocol_tunnel
Description
Used to enable the Layer 2 protocol tunneling function.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To enable the Layer 2 protocol tunneling function:
DES-3528:admin# enable l2protocol_tunnel
Command: enable l2protocol_tunnel
Success.
DES-3528:admin#
disable l2protocol_tunnel
Purpose
Used to disable the Layer 2 protocol tunneling function.
Syntax disable l2protocol_tunnel
Description
Used to disable the Layer 2 protocol tunneling function.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To disable the Layer 2 protocol tunneling function:
DES-3528:admin# disable l2protocol_tunnel
Command: disable l2protocol_tunnel
Success.
DES-3528:admin#