xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
569
show vlan_counter
Purpose
This commands displays the statistic control entries created for VLANs.
Syntax show vlan_counter {[vlan <vlan_name> | vlanid < vidlist > ]}
Description
This commands displays the statistic control entries created for VLANs.
Parameters vlan_name – Specifies the VLAN name.
vlanid – Specifies a list of VLANs by VLAN ID. When VLAN is not specified, all VLAN
counters will be displayed.
Restrictions
None.
Example usage:
To display the statistic control entries:
DES-3528:admin# show vlan_counter vlanid 1-2
Command: show vlan_counter vlanid 1-2
VLAN ID Ports Packet Type Counter Type
------- -------------- ----------- ------------
1 Broadcast Packet
show vlan_counter statistics
Purpose
Displays the VLAN level receives packets or receive byte statistics.
Syntax show vlan_counter statistics {[vlan <vlan_name> | vlanid < vidlist >] {port <portlist>}}
Description
This command displays the VLAN level receives packet or receive byte statistics.
Parameters vlan_name – Specifies the VLAN name.
vlanid – Specifies a list of VLANs by VLAN ID. When VLAN is not specified, all VLAN
counters will be displayed.
Restrictions
None.
Example usage:
To display the VLAN counter statistic entries:
DES-3528:admin# show vlan_counter statistics vlanid 1-2
Command: show vlan_counter statistics vlanid 1-2
VLAN Port Frame Type RX Frames/RX Bytes Frames Per Sec/Bytes Per Sec
==== ==== ================ ================== ============================
1 Broadcast(Packet) 12335 23
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
To Next Page
Loading...
Need help?
General