D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
571
DES-3528:admin#config power_saving state enable
Command: config power_saving state enable
Success.
DES-3528:admin#
config power_saving hibernation
Purpose
This command is used to add or delete the power saving schedule on system hibernation.
Syntax config power_saving hibernation [[add | delete] time_range <range_name 32> |
clear_time_range]
Description
When the system enters hibernation mode, the Switch will go into a low power state and idle.
It will shut down all the ports, all network functionality (telnet, ping, etc.) will not work, and
only the console connection will work via the RS232 port.
Parameters add - Specifies to add a time range
delete - Specifies to delete a time range
time_range - Specifies the name of the time range used.
<range_name 32> - Enter the name of the time range used here. This name can be up to 32
characters long.
clear_time_range - Specifies to clear all the time ranges of system hibernation.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To add a time range named “range_1” on system hibernation:
DES-3528:admin#config power_saving hibernation add time_range range_1
Command: config power_saving hibernation add time_range range_1
Success.
DES-3528:admin#
To delete a time range named “range_2” on system hibernation:

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English