config power_saving port
Purpose
This command is used to add or delete the power saving schedule on the port.
Syntax config power_saving port [<portlist> | all] [[add | delete] time_range <range_name 32>
| clear_time_range]
Description
When any schedule is up, the specific port will be shut down (disabled).
Parameters port - Specifies the port list used for the configuration.
<portlist> - Enter the list of ports, used for this configuration, here.
all - Specifies that all the ports will be used.
add - Specifies to add a time range here.
delete - Specifies to delete a time range here.
time_range - Specifies the name of the time range used.
<range_name 32> - Enter the name of the time range used here. This name can be up to 32
characters long.
clear_time_range - Specifies to clear all the time ranges of system hibernation.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To add a time range named “range_1” on port 1:
To Next Page
Loading...
