D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
583
DES-3528:admin#config ddm ports 1:25 reload_threshold
Command: config ddm ports 1:25 reload_threshold
Success.
DES-3528:admin#
config ddm power_unit
Purpose
The command is used to configure the unit of DDM TX and RX power.
Syntax config ddm power_unit [mw | dbm]
Description
The command is used to configure the unit of DDM TX and RX power.
Parameters mw - Specify the DDM TX and RX power unit as mW.
dbm - Specify the DDM TX and RX power unit as dBm.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the DDM TX and RX power unit as dBm:
DES-3528:admin#config ddm power_unit dbm
Command: config ddm power_unit dbm
Success.
DES-3528:admin#
show ddm
Purpose
This command is used to display the DDM global settings.
Syntax show ddm
Description
This command is used to display the DDM global settings.
Parameters
None.
Restrictions
None.
Example usage:

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English