D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
59
Management Stations
IP Address Access Interface
----------------------------------------------------------------
10.62.32.1/32
10.62.32.1/16
Total Entries: 2
DES-3528:admin#
delete trusted_host
Purpose
Used to delete a trusted host entry made using the create trusted_host command above.
Syntax delete trusted_host [ipaddr <ipaddr> | ipv6address <ipv6addr> | network
<network_address> | ipv6_prefix <ipv6networkaddr> | all]
Description
Used to delete a trusted host entry made using the create trusted_host command above.
Parameters ipaddr - The IP address of the trusted host.
<ipaddr> - Enter the IP address used for this configuration here.
ipv6addr - The IPv6 address of the trusted host.
<ipv6addr> - Enter the IPv6 address used for this configuration here.
network - The network address of the trusted network.
<network_address> - Enter the network address used for this configuration here.
ipv6_prefix - The IPv6 subnet prefix address of the trusted network
<ipv6networkaddr> - Enter the IPv6 subnet profix address here.
all - All trusted hosts will be deleted.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To delete a trusted host with an IP address 10.62.32.1:
DES-3528:admin# delete trusted_host ipaddr 10.62.32.1
Command: delete trusted_host ipaddr 10.62.32.1
Success.
enable snmp traps
Purpose
Used to enable SNMP trap support.
Syntax enable snmp traps
Description
This command is used to enable SNMP trap support on the Switch.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To enable SNMP trap support on the Switch:
DES-3528:admin# enable snmp traps
Command: enable snmp traps
Success.
DES-3528:admin#

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English