D-Link xStack DES-3528 Series Cli Reference Guide

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
60
enable snmp authenticate_traps
Purpose
Used to enable SNMP authentication trap support.
Syntax enable snmp authenticate_traps
Description
This command is used to enable SNMP authentication trap support on the Switch.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example Usage:
To turn on SNMP authentication trap support:
DES-3528:admin# enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
DES-3528:admin#
show snmp traps
Purpose
Used to show SNMP traps support on the Switch .
Syntax show snmp traps {linkchange_traps {ports <portlist>}}
Description
This command is used to view the SNMP traps support status currently configured on the
Switch.
Parameters linkchange_traps – Specifies to display the SNMP Linkchange Traps.
ports – Specifies the list of ports to be displayed.
Restrictions
None.
Example usage:
To view the current SNMP traps support:
DES-3528:admin#show snmp traps
Command: show snmp traps
SNMP Traps : Enabled
Authenticate Trap : Enabled
Linkchange Traps : Enabled
Coldstart Traps : Enabled
Warmstart Traps : Enabled
DES-3528:admin#
disable snmp traps
Purpose
Used to disable SNMP trap support on the Switch.
Syntax disable snmp traps
Description
This command is used to disable SNMP trap support on the Switch.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To prevent SNMP traps from being sent from the Switch:
DES-3528:admin# disable snmp traps
Command: disable snmp traps
Success.

D-Link xStack DES-3528 Series Specifications

General

Brand	D-Link
Model	xStack DES-3528 Series
Category	Switch
Language	English