Dalsa A CIS Series - Supported Industry Communications Standards; Genicam

10 • AxCIS Series Camera Features Linea HS Series Camera User's Manual
Table 2: Frame Grabber
Compatible Frame grabber
Linea HS Model
Teledyne DALSA Xtium2-CLHS FX8 (OR-A8S0-FX840)
All models
Table 3: Software
Software
Product Number / Version Number
Camera firmware
Embedded within camera
GenICam™ support (XML camera description file)
Embedded within camera
Sapera LT, including CamExpert GUI application and GenICam for Camera Link
imaging driver
Latest version on the
Teledyne DALSA Web site
Supported Industry Communications Standards
GenICam™
The camera is GenICam compliant and implements a superset of the GenICam Standard Features
Naming Convention specification V1.5.
This description takes the form of an XML device description file using the syntax defined by the
GenApi module of the GenICam specification. The camera uses the GenICam Generic Control
Protocol (GenCP V1.0) to communicate over the Camera Link HS command lane.
For more information see www.genicam.org.