14 • AxCIS Series Camera Features Linea HS Series Camera User's Manual
Precautions
Read these precautions before using the CIS module.
Confirm that the module’s packaging is undamaged before opening it. If the packaging is damaged
please contact the related logistics personnel.
Do not open the housing of the module. The warranty is voided if the housing is opened.
Keep the module housing temperature in a range of 0 °C to +50 °C during operation. The module
can measure its internal temperature. Use this feature to record the internal temperature of the
module when it is mounted in your system and operating under the worst-case conditions. The
module will stop outputting data if its internal temperature reaches +80 °C.
Do not operate the module in the vicinity of strong electromagnetic fields. In addition, avoid
electrostatic discharging, violent vibration and excess moisture.
To clean the device, avoid electrostatic charging by using a dry, clean absorbent cotton cloth
dampened with a small quantity of pure alcohol. Do not use methylated alcohol. To clean the
surface of the camera housing, use a soft, dry cloth. To remove severe stains, use a soft cloth
dampened with a small quantity of neutral detergent and then wipe dry. Do not use volatile
solvents such as benzene and thinners, as they can damage the surface finish.
Though this module supports hot plugging, it is recommended that you power down and disconnect
power to the module before you add or replace system components.
Electrostatic Discharge and the CMOS Sensors
Image sensors and the module’s housing can be susceptible to damage from severe electrostatic
discharge (ESD). Electrostatic charge introduced to the sensor windows surface can induce charge
buildup on the underside of the window. The charge normally dissipates within 24 hours and the
sensors returns to normal operation.
To Next Page
Loading...
Need help?
General