Linea HS Series Camera User's Manual Appendix A: GenICam Commands • 59
Executes the operation selected by File Operation Selector on
the selected file.
Selects the access mode used to open a file on the device.
Select READ only open mode
Select WRITE only open mode
Defines the intermediate access buffer that allows the exchange
of data between the device file storage and the application.
Controls the mapping offset between the device file storage and
the file access buffer.
Controls the mapping length between the device file storage
and the file access buffer.
Displays the file operation execution status. (RO).
The last file operation has completed successfully.
An invalid parameter was passed to the last feature called.
Attempt to write to a read-only (factory) file.
The file has not been opened yet.
The file is larger than expected.
The last file operation has completed unsuccessfully because
the selected file is not present in this camera.
For Read or Write operations, the number of successfully
read/written bytes is returned. (RO)
Represents the size of the selected file in bytes.
To Next Page
Loading...
Need help?
General