Danfoss VLT AutomationDrive Design Guide

176FA272.10
0[0.0]
55[2.2] 91[3.6]
139[5.5] 175[6.9]
0[0.0]
453[17.8]
B
A A A A
-R 81
9
19 Nm [14 FTa
Illustration 7.20 IP21 (NEMA type 1) and IP54 (NEMA type 12)
enclosure power connection positions (detail B)
Mechanical Installation - ... FC 300 Design Guide
138 MG.33.BD.02 - VLT
®
is a registered Danfoss trademark
77

Danfoss VLT AutomationDrive Specifications

General

Supply Voltage	3 x 200-240 V ±10% 3 x 380-500 V ±10% 3 x 525-600 V ±10%
Enclosure	IP20
Output Power Range	0.25 kW - 1.5 MW
Communication Protocols	Modbus RTU
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short circuit, Ground fault, Motor overload
Ambient Temperature Range	-10°C to +50°C (14°F to 122°F)