Danfoss VLT FC 51 Series - 4.9. Parameter Group 8: Communication; 4.9.1. 8-** Communication; 4.9.2. 8-0* General Settings; 8-01 Control Site

[3] *
LogicOr Activation via serial communication port or a digital input.
8-52 DC Brake Select
Option: Function:
Select control of DC brake via digital input and/or bus.
[0] Digital Input Activation via a digital input.
[1] Bus Activation via serial communication port.
[2] LogicAnd Activation via serial communication port and a digital input.
[3]
*
LogicOr Activation via serial communication port or a digital input.
8-53 Start Select
Option: Function:
Select control of start function via digital input and/or bus.
[0] Digital Input Activation via a digital input.
[1] Bus Activation via serial communication port.
[2] LogicAnd Activation via serial communication port and a digital input.
[3]
*
LogicOr Activation via serial communication port or a digital input.
8-54 Reversing Select
Option: Function:
Select control of reversing function via digital input and/or bus.
[0] Digital Input Activation via a digital input.
[1] Bus Activation via serial communication port.
[2] LogicAnd Activation via serial communication port and a digital input.
[3]
*
LogicOr Activation via serial communication port or a digital input.
8-55 Set-up Select
Option: Function:
Select control of set-up selection via digital input and/or bus.
[0] Digital Input Activation via a digital input.
[1] Bus Activation via serial communication port.
[2] LogicAnd Activation via serial communication port and a digital input.
[3]
*
LogicOr Activation via serial communication port or a digital input.
8-56 Preset Reference Select
Option: Function:
Select control of Preset Reference selection via digital input and/
or bus.
[0] Digital Input Activation via a digital input.
VLT Micro Drive FC 51 4. Parameter Descriptions
MG.02.C2.02 - VLT
®
is a registered Danfoss trademark 55
4